DiagnosticsSzczecin, PolandMon to Sat8:00 to 16:00 CETService baseWałsnów 22b, Poland
info@chillerserwis.com
ChillerSerwis
Manufacturer service or independent service for your chiller?

Manufacturer service or independent service for your chiller?

Air-cooled Trane chillers on an office roof serviced by an independent service

Manufacturer service or independent service for your chiller? Under warranty: the manufacturer. After warranty, with several brands on site and a need for a quick date and a report with measurements: an independent service is usually faster and cheaper over the life of the unit. The comparison below shows eight criteria and the cases where we would send you to the manufacturer.

Every plant with a chiller faces this question sooner or later. The authorised service knows its own units best, but it has one brand, a queue in season and a price list that assumes a service contract. An independent service covers a mixed fleet, has shorter lead times and documents every visit, but it works without the manufacturer’s warranty. Below is an honest comparison, including the cases where we would send you to the manufacturer.

Manufacturer service or independent: the comparison

CriterionManufacturer service (authorised)Independent service after warranty (ChillerSerwis)
Range of brandsUsually one brand, sometimes a group of brandsAll major brands, including models no longer in production
Visit dateDepends on the regional branch workload, often longer in seasonTwo bases (Szczecin, Wałsnów), Germany and the EU, six days a week
Spare partsOriginal OEM parts, full compatibility; availability for older models can be limitedOEM where it makes sense; equivalents and regeneration where the manufacturer has no parts; own stock of components
Controller accessFull factory service softwareService computers and software for the main brands; where access is blocked, a replacement controller with full safety functions
Manufacturer warrantyService under warranty at the manufacturer or at an appointed serviceAfter the warranty period, no restrictions; we do not extend warranties, we service after them
Documentation after the visitService report according to the manufacturer standardReport with measurements, photos and recommendations within 48 hours, a basis for the F-gas log entry
Cooperation modelOften a service contract with a retainer, billed annuallyIndividual orders or an inspection agreement without retainer fees; you pay for the work done
When to chooseUnit under warranty, rare design, insurer or investor requirementsUnit after warranty, a mixed fleet of brands, older machines, need for a quick date and documentation

When the manufacturer service is the better choice

The authorised chiller service has the advantage when the unit is under warranty, when the design is unusual (for example oil-free centrifugal compressors) or when the investor or insurer demands an authorised service in the contract. We say so openly and do not take such jobs. Warranty inspections are done by the service appointed by the manufacturer or the supplier.

Air-cooled screw chiller on a roof grating during a high pressure alarm diagnosis

When an independent chiller service gives you more

When you have several brands in one plant and want one partner. When the unit is 10 years old or more, and the manufacturer stops supporting it and supplying parts. When the lead time matters, as does a report with measurements you can show your management. And when you prefer to pay for the work done rather than for availability. In those situations the answer to “manufacturer service or independent” is simple: an independent service after warranty is usually faster and cheaper over the whole life of the unit.

Rooftop units on a building seen from a drone after service

Manufacturer service or independent: what about controller access?

This is the most common objection and a fair one. Some manufacturers block service parameters behind passwords. We have service software for the main brands and, where access is impossible, we propose a replacement controller with the full safety chain: high and low pressure, flow, anti-freeze, compressor protection. The unit keeps its safety functions and gains a controller that can be serviced for years.

Chiller controller display checked when the unit does not start in winter

What an independent service costs

Diagnostic visit from 800 EUR net, working hour 115 EUR net, travel 0.75 EUR per km from Szczecin. No retainer fees. Repair prices always follow from the report, and for leak checks the report meets the requirements of Regulation (EU) 2024/573 for your F-gas log.

Questions about manufacturer service or independent

Does independent service void the manufacturer warranty?

During the warranty period it may. That is why we work on units after warranty and tell you to use the manufacturer service while the warranty runs.

Do you use original parts?

Where it makes sense, yes: compressors, controllers and valves with OEM references. Where the manufacturer no longer supplies parts, we propose tested equivalents or regeneration.

Can you read the manufacturer controller?

For the main brands yes. Where access is blocked by a password, we propose a replacement controller with full safety functions.

Is an independent service cheaper?

Over the life of the unit usually yes: you pay for the work done, not for a retainer, and parts are selected per case. The hourly rate itself may be similar.

Do you give a warranty on the repair?

Yes, 12 months on the repair and on the parts we supply, written into our Terms of Service.

Unit out of warranty?

Send us a photo of the nameplate and a short description, and we reply within one working day with a date and a quote for the diagnosis.

Request serviceinfo@chillerserwis.com

Request service